Instructions for use UF2000
These are general instructions. (For specific applications, please select from the list below):
Determine the location of the urine. If it is difficult to determine the exact location of the urine, please use our urine stain detector .
Spray directly on the urine affected area. The entire affected area has to be covered with UF2000 . Make sure that sufficient UF2000 is sprayed on the urine affected area and allow it to soak in properly. The quantity UF2000 should be at least equal to the estimated amount of urine.
Wait a while. Do not scrub or rub it in.
The treated area should be allowed to dry naturally.
Removing urine odour from carpeting or fabric furniture with UF2000
Always check beforehand that the material that is to be treated will retain its colour, by testing the product in an inconspicuous area!
For recent urine stains:
Determine the location of the urine. If it is difficult to determine the exact location of the urine, please use our urine stain detector.
Do not use other (chemical) detergents or masking agents. Also do not use shampoo. If you plan to shampoo or clean your carpet, then do so after you have removed both urine odour and urine stains ..
Urine stains in wooden or hardwood floors are the most difficult stains to remove, especially when the wood has become darker because of repeated exposures to urine.
The darker spots indicate that there is a concentration of dried urine salts (urine crystals), and also that the wood is already damaged by the acids in the urine.
By repeating the treatment several times, UF2000 can remove the odour completely and it can also remove a large part of the dried salt crystals.
However, the product cannot repair the damage that has already been caused to the wood. In most cases, by carefully sand..
Untreated stone or concrete look as if they are solid surfaces, but in fact they are porous, and easily absorb urine through many small openings. This means that the urine can easily enter very deep into stone or concrete, which makes the odour removal process more difficult. To obtain the best possible result, please follow these steps.
Do not use other (chemical) cleaning liquids or masking products!
Make sure that the surface is completely dry.
If there are remains of carpet glue on the floor, they will have to be removed first.
Sweep or dust the ..